Linear Z-Wave

Linear Z-Wave Lighting, Security & Control Products

Linear Z Wave Automation Products

Linear’s family of Z-Wave certified wireless lighting controls (switches,
dimmers, outlets and plug-in modules) brings a new level of intelligent
wireless capability to commercial and residential environments.
The Z-Wave wireless protocol is an international wireless standard
for remote home automation, security and other applications.
Embedded in each device, the Z-Wave smart chip enables two-way
RF communication among hundreds of Z-Wave enabled devices,
allowing products and services from multiple manufacturers to
work seamlessly.
Linear Z-Wave products are easy to install, and allow dealers to
create an integrated wireless network with nearly limitless expansion
and interoperability with security and health monitoring systems,
energy management, home entertainment, appliances, and more.
Home and business owners gain a host of wireless lifestyle
• Convenience
• Affordability
• Compatibility with building automation systems
• Ease of Use
• High reliability
• Scene Capable
All products operate at the standard 908.42 MHz frequency,
supporting network inclusion and are security system compatible.
All Linear Z-Wave products integrate with other Linear Z-Wave
enabled products, and can also act as a wireless repeater to ensure
that commands intended for another device in the network are
received (useful when a device would otherwise be out of radio

Linear Z-Wave Products

Z-WAVE Literature

5 Things Dealers Should Know About Z-Wave Systems and Equipment

Z-Wave home automation devices can be a great resource for dealers who want to offer their
customers an impressive array of added convenience and the ability to change the actual look
and feel of a residence or small business, without having to open walls or pull new wires.
Some of the popular uses for Z-Wave equipment include:
 - Controlling thermostats
 - Simple on/off and dimmable lighting control
 - 3-Way switch operation where previously there was not a 3-way switch
 - Simple motor or fan control
 - Security & life safety sensors
In this document, we’re offering our dealers a number of tips and tricks that should help better
prepare for a Z-Wave installation, and you may find out some features that Z-Wave devices
offer that you previously did not know about!

1. Most Z-Wave equipment can act as a wireless repeater for other Z-Wave
This feature allows you to create a ‘mesh’ network of Z-Wave equipment, which is especially important
in larger homes or places with more widely‐dispersed Z-Wave devices. When a Z-Wave device is sent a
command (either locally from a console/hub or remotely via a mobile app through the console/hub), the
signal is transmitted from the console/hub to any devices that are in range. When received by those
devices, they either act upon the request (if the activation request)

Linear Z-Wave Home Automation

2. Using the Association Command Class feature offered with some Z-Wave
systems, you can install a 3‐way Z-Wave light switch at any in‐wall powered
location, and control up to 6 other Z-Wave switches.
As an example, one could install a 3-way Z-Wave switch in a secondfloor
bedroom that turns on the driveway, foyer and stairway lights.
This way, if the doorbell rings at night, one does not have to fumble
to locate and turn on three different light switches to make the
stairway, entryway and driveway lights turn on. One 3-way Z-wave
switch turns on or off all of these lights simultaneously with one
click…only with Association Command Class.

3. Customers who want remote management of their Z-Wave system using a
smart phone may have to pay a monthly service fee to enable scheduling,
event notifications, or advanced logic schemes.
Smart phone management and activation is sometimes very important for customers, and it’s crucial, as
a home automation specialist, that you understand the ins and outs of getting the most out of a Z-Wave
There are a couple of DIY systems that do not require that customers sign a year or longer contract. It’s
important to note that the DIY systems resellers also offer a “premium” service plan for advanced
automation features, and offer nothing but the most basic smart phone‐activated features (i.e. on/off)
free of charge. If a customer only needs remote on/off and one‐device‐at‐a‐time control, then the basic
plan might work. However, getting the most out of a system using a smart phone will likely involve an
automation services agreement.
It is common for home automation providers to bundle their Z-Wave remote service program together
with other primary services, such as security system monitoring, so that the monthly fee for remote
service and advanced automation is somewhat masked by the primary service.
Make sure you know what services options are available from your home automation panel’s
manufacturer. Many manufacturers have partnered with a number of alternatives so that you, the
dealer, have more choices in automation with smart phone/remote management capability.

4. I have just installed a Z-Wave‐capable home automation system in a
customer’s home with just a couple of Z-Wave switches. Can the customer
simply buy more off‐the‐shelf or DIY Z-Wave products and add it to the
system themselves?
It depends on the home automation system brand and ease of “registering” new devices to the Z-Wave
console/hub. Things for DIY customers to consider include:
  - How far away from the console/hub is the new device to be installed? If the Mesh network (see
#1) is small, the new location may not be in range of the network, so an intermediate device
may be needed.
  - Are the Z-Wave devices being purchased Z-Wave certified? All certified devices are compatible
with all other Z-Wave devices, as this is something the Z-Wave standard requires.

5. How difficult is it to install a Z-Wave switch or fixture?
Installing a Z-Wave switch or fixture is generally very easy,
assuming that you have previous experience installing other
similar switches or fixtures that do not have the Z-Wave
IMPORTANT: For anything involving electrical wiring,
always make sure to turn off the power main before you get
started to avoid the possibility of electric shock!
After you’ve turned off the power, installing a standard ZWave
on/off switch or dimmer switch is as easy as identifying
the wires in the box that are connected to the switch you are
replacing, labeling each wire, and then re‐wiring in the new Z-Wave switch using proper wiring practices
for your local code (wire nuts, electrical tape, etc.), and following the diagram in the instruction sheet
provided. Linear offers a suite of Z Wave installation training videos available for FREE online.
Go to, and click on “Training Videos” to learn more about installing ZWave
Once installed and even before it’s programmed, the new Z Wave switch should operate using the
switch paddle, just like a regular switch does. But until it is “registered” with the Z Wave console/hub, it
will not be able to be controlled by smart phones, or a command initiated at the controller/hub. Once
you’ve followed the “registration” process to get the switch to communicate with the Z Wave console
hub, then the possibilities are wide open for automation and advanced control.
Enjoy your new Z-Wave equipment and systems!

PD300Z-2: Z-Wave Plug-in Dimmer Module

PD300Z-2: Z-Wave Plug-in Dimmer Module

The Linear PD300Z-2 Plug-in Lamp Module is designed to provide Z-Wave control to a connected dimmable lamp. The PD300Z-2 module is plugged into any...
PS15Z-2: Z-Wave Plug-in Appliance Module

PS15Z-2: Z-Wave Plug-in Appliance Module

The Linear PS15Z-2 Plug-in Appliance Module is designed to provide Z-Wave control to a connected load. The PS15Z-2 module is plugged into any...
WD1000Z-1: Z-Wave Wall Dimmer Switch

WD1000Z-1: Z-Wave Wall Dimmer Switch

Note to Installers: When installing a Z-Wave 3-Way Light setup utilizing Linear products, you will need a Load Bearing switch (WS15Z-1, WD500Z-1 or...
WD500Z-1: Z-Wave Wall Dimmer Switch

WD500Z-1: Z-Wave Wall Dimmer Switch

Note to Installers: When installing a Z-Wave 3-Way Light setup utilizing Linear products, you will need a Load Bearing switch (WS15Z-1, WD500Z-1 or...
WO15Z-1: Z-Wave Single Wall Outlet

WO15Z-1: Z-Wave Single Wall Outlet

The Linear WO15Z-1 Single Wall Outlet is wired in place of a standard receptacle. This device allows remote ON/OFF control of loads connected to the...
WS15Z-1: Z-Wave Wall Switch

WS15Z-1: Z-Wave Wall Switch

Note to Installers: When installing a Z-Wave 3-Way Light setup utilizing Linear products, you will need a Load Bearing switch (WS15Z-1, WD500Z-1 or...
WT00Z-1: Z-Wave 3-Way Wall Accessory Switch

WT00Z-1: Z-Wave 3-Way Wall Accessory Switch

Note to Installers: When installing a Z-Wave 3-Way Light setup utilizing Linear products, you will need a Load Bearing switch (WS15Z-1, WD500Z-1 or...
Your IP Address is:
Copyright © 2004-2018 BEC Integrated Solutions, LLC. All Rights Reserved Worldwide. Home Audio Plus your Electronic Communications Specialists. Designated trademarks and brands are the property of their respective owners. We are not responsible for typographical or photographical errors. Prices and specifications are subject to change without notice. Use of this Web site constitutes acceptance of  our Conditions of Use and Privacy Notice. Any unauthorized use is a violation of applicable laws.
Main No. (716)-689-0871, Fax No.(716)-689-0872, Toll free No. (888) 556-3998.