WS15Z-1: Z-Wave Wall Switch

Note to Installers: When installing a Z-Wave 3-Way Light setup utilizing Linear products, you will need a Load Bearing switch (WS15Z-1, WD500Z-1 or WD1000Z-1) and a non-load bearing WT00Z-1. Multiple WT00Z-1 switches can be utilized to control multiple Load Bearing devices. Please refer to the linked Technical Bulletin on Z-Wave 3-Way Light Switch Setup for more information.

The Linear WS15Z-1 Wall Mount Switch allows remote ON/OFF control of loads connected to the switch, and is easily wired in place of a standard wall switch.

The Switch integrates with other Linear Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).

Replaceable Trim Ring

The WS15Z-1 Wall Mount Switch has a field replaceable trim ring - the color of the device can be altered with the Trim Ring Kit model in black, brown, almond and ivory.

Specifications

• Maximum Load:
  Resistive: 15 amps (1800 watts) max., 120 VAC 
  Motor: 1/2 H.P. maximum, 120 VAC 
  Incandescent: 600W maximum, 120 VAC 
• Signal (Frequency): 908.42 MHz, 9.6Kbps or 40Kbps capable
• Range: Up to 100 feet between the wireless controller and/or the closest Z-Wave device
• Input: 120v 15A 60Hz
• Z-Wave Version 4.55
• Network wide inclusion
• Scene: Command Class
• Security beaming
• Requires a Neutral
• Replaceable Trim Ring Design

Order number: WS15Z-1