RAULAND RESPONDER HSS400—HIGH SECURITY BEDSIDE STATION

(image for) RAULAND RESPONDER HSS400—HIGH SECURITY BEDSIDE STATION
RAULAND RESPONDER HSS400—HIGH SECURITY BEDSIDE STATION
  • Model: HSS400-REF
  • Manufactured by: Rauland

 Ask a Question 

Rauland Responder HSS400—HIGH-SECURITY BEDSIDE STATION Pre-Owned

View Other Rauland Nurse Call REPLACEMENT Parts

The HSS400 High-Security Bedside Station is a single bed station that allows both patients and staff to place different call-in priorities, depending on their requirements, to the assigned Console(s). It is specifically designed for nurse call systems used in high-security facilities such as psychiatric wards, correctional institutions or wherever vandalism may be encountered.

Calls are initiated by a patient or staff member using a 1⁄4” call cord or similar device. With the use of the R4KOUT4S Output Driver and DCA200 Domeless Controller, the HSS400 can have its calls visually annunciated on the CLS100 Series High-Security Corridor and Zone lights.

The HSS400 is virtually indestructible. It is protected externally by an 11-gauge brushed stainless steel faceplate. The cancel switch of the station is vandal-proof momentary push-button type. A rugged steel actuator activates a momentary switch whose movement is limited by a mechanical stop to prevent damage caused by attempted vandalism. The speaker/microphone is protected against damage.

The bedside station is connected to its associated corridor light or domeless room controller and is continually supervised for station presence. Through programming, a “Trouble” message can annunciate at the associated console(s) when the station is removed from the system.

FEATURES

 

  • Vandal-Proof Speaker Mounting Design
  • Heavy-Duty Tamper-Proof Call Jack and Cancel Switch
  • Monitor LED and call-assurance LED with cancel button
  • 11-Gauge Stainless Steel Construction
  • Fits Standard 3-Gang Masonry Backbox
  • Continuous supervision for station presence
  • Plug-in connectors for easy service

 

 

 

 

 

 

 

 

SPECIFICATIONS

Power Required: 15.5V DC @ 10mA

Weight: 2.35 lbs. (1.07 kg)

Size: W: 7.50” (19.10 cm) H: 5.50” (14.00 cm) D: 2.50” (6.40 cm)

Housing and Finish: 11-gauge brushed stainless steel faceplate

Controls: One (1) Call Jack, One (1) Cancel button, One (1) Monitor LED indicator, and One (1) Call-assurance indicator

Terminations: Plug-on connectors

Backbox Options: Standard (3-3/4” to 3-1/2” deep) 3-gang


This product was added to our catalog on Tuesday 22 February, 2022.

Your IP Address is: 216.73.216.60
Copyright © 2026 BEC Integrated Solutions, LLC. Powered by BEC Integrated LLC.