Frequently Asked Question

please see attachment.

Special note:

• TRG: has one wire coming from the door station or triggering device.
  
  • [Red wire (if its a BE cat 5 system) from the door station lock connector is the sole one needed]; [Yellow wire (if its an MT 2-wire system) from the door station lock connector is the sole one needed]; for the IP system please refer to the following link: https://www.becaudio.com/ticket.system/upload/kb/faq.php?cid=28
• GND (-): there are three wires.
  
  • [Green wire (if its a BE cat 5 system) from the door station]
  • [ground from the 12vDC]
  • [ground from the lock]
• 12v (+):
  
  • [positive from the 12vDC]
  • [C connector of the 6062]
• NO:
  
  • [positive side from the lock]
• C:
  
  • bridge to the 12v (+)
• NC:
  • empty

6062 DIP code:

1. dip code 1 OFF
2. dip code 2 ON
3. dip code 3 ON
4. dip code 4 ON

6062 PSU is shared with the door station 12vDC. This is not permitted. The 6062 should have it's own 12vDC PSU separate from the 12vDC feeding the door station.