Frequently Asked Question

Note that you will need a SIP subscription to operate this function. Now, on the technical side, the setup consist of four steps.

• The main step involves the door station SIP configuration.
• Then, the door station call forwarding configuration.
• then, download the desired app [IOS vs. Android] - Other platform will be added soon.
• then the mobile application configuration

The following procedure is to setup the SIP connection to the NT-IP-DRCR door panel?

1. access the web interface of the NT-IP-DRCR [example, 192.168.x.90]
2. Log in the admin interface using the default username: admin, password: 123456
3. from the left-end menu option select "VOIP"
4. In this window, update the following settings:
   1. Under [VOIP / [SIP]]:
   2. SIP enable: [Only enabled if subscribed to the service]
   3. Proxy: sip:66.185.27.147
   4. Realm: 66.185.27.147
   5. Outbound: sip:
   6. STUN IP: 66.185.27.147
   7. STUN Port: 5060
   8. User: [TBD]
   9. Password:[TBD]
   10. Timeout: 300s
5. Then to commit the change select "submit" to save the settings.

If successful, look on the main page for the statement: SIP: OK

Next

• The following procedure is to setup the SIP / Call forwarding to you mobile phone?
• access the web interface of the NT-IP-DRCR [example, 192.168.x.90]
• Log in the admin interface using the default username: admin, password: 123456
• from the left-end menu option select "Forward"
• In this window, update the following settings:
• RoomNo:[add the room number #### configured to call your monitor] if unsure, contact tech@becintegrated.com
• Account: sip:[TBD]@66.185.27.147

Below is your link to download the mobile app.

• For Apple ios latest Version 2.4.3: https://itunes.apple.com/in/app/cloudipcalls/id1077608612?mt=8
• For Android apk latest Version 3.3: : https://play.google.com/store/apps/details?id=com.test.ihome

The mobile app is very straight forward to setup.

• from the app menu, please select Settings
• Now, under Room Settings, you match the same info in your Monitor Room Settings. Your Device: for the app will be between 1 to 9. This means that each user app will have a different count.
• Next, we are still under Room Settings, ensure you match the Sync number of your monitor. This essentially clones the app after the monitor.
• When done, remember to Save your settings.
• Next, go to the SIP Settings
• ensure the ON/OFF box is checked
• Your proxy states: sip:66.185.27.147
• each user will use their own SIP account as previously provided. For instance, your user will look like this: User:[TBD]
• Password:[TBD]
• When done, remember to Save your settings.

That it! Ensure your mobile app has access to the internet through your local networking connection, WiFi, or data plan.