Frequently Asked Question
How to set up residential password to open the door:
Programming Residential/Tenant Passwords:
First Restart residential (Turn ON/OFF) residential password unlock
1. To enter SYS2 programming mode:
Enter on keypad: 2 *
Display should show: ----
2.(Input initial admin password 6666)
Enter on keypad: 6666
Display should show: Sys2
3.
Enter on keypad: 5 *
Display should show: OFF
4.
Enter on keypad: 8 * ( 8* turns RP on )
Display should show: PASS
**********************************
2. Administrator set up the residential password (Done per apartment Number)
1 . Enter PW Programming - [Room 0101]
Enter on Keypad: 6 *
Display should show: ----
2. Input Admin password 6666,or your new APW
Enter on Keypad: 6666 *
Display should show: PASS and then r
3. Input room number 0101 or your first room #
Enter on Keypad: 0101(Room number)
Display should show: P
4. Input residential password, for example use”1111”as the password of 0101# room
Enter on Keypad: 1111(Password)
Display should show: PASS
Room 0101 is OK now, password is 1111 - next enter the next room # and repeat
[To enter building using the Residential Password: Press- 8* immediately followed by the room number and password Example – 8* 01011111 – Door will now unlock]
1 . Enter PW Programming - [Room 0102]
Enter on Keypad: 6 *
Display should show: ----
2. Input Admin password 6666,or your new APW
Enter on Keypad: 6666 *
Display should show: PASS and then r
3. Input room number 0101 or your first room #
Enter on Keypad: 0102(Room number)
Display should show: P
4. Input residential password, for example use”1111”as the password of 0102# room
Enter on Keypad: 1111(Password)
Display should show: PASS
Room 0102 is OK now, password is 1111 - next enter the next room # and repeat
************************************
How to change the Residential password by tenants?
1 . Enter PW Programming - [Room 0102] [this is an example]
Enter on Keypad: 5 *
Display should show: r
2. Input room number 0102
Enter on Keypad: 0101(Room number)
Display should show: P
3. Input residential password, for example use”1111”as the password of 0102# room
Enter on Keypad: 1111(Password)
4. Input residential new password, for example use”2020”as the password of 0102# room
Enter on Keypad: 2020(Password)
Display should show: PASS
***********************************************
To activate the Public Password:
Step 1: Activate the public password function.
2 * 6666
6 *
8 *
0 *
Now, the public password was activated and the initial password is:
9 * 8888
Press 9 * 8888, the door will open.
If you want to change the public password continue following these steps below:
1 * 6666
6 *
XXXX (new public password)
*
0 *
Now, the new public password was changed and the password is:
9 * XXXX (whatever your new public password is)
Press 9 * XXXX, the door will open.