Frequently Asked Question

[NT-IP-DRCR-CE][No Monitor][Mobie App][IpCalls] - DRCR to SIP App only
Last Updated 6 years ago

This section provides fast deployment settings

Complete SIP setup instructions

Note that you will need a SIP subscription to operate this function.
Now, on the technical side, the setup consist of four steps.

  • The main step involves the door station SIP configuration.
  • Then, the door station call forwarding configuration.
  • then, download the desired app [IOS vs. Android] - Other platform will be added soon.
  • then the mobile application configuration


The following procedure is to setup the SIP connection to the NT-IP-DRCR-CE door panel?

  1. access the web interface of the NT-IP-DRCR-CE [example, 192.168.x.90]
  2. Log in the admin interface using the default username: admin, password: 123456
  3. from the left-end menu option select "VOIP"
  4. In this window, update the following settings:
    1. Under [VOIP / [SIP]]:
    2. SIP enable: [Only enabled if subscribed to the service]
    3. Proxy: sip:66.185.27.147
    4. Realm: 66.185.27.147
    5. Outbound: sip:
    6. STUN IP: 66.185.27.147
    7. STUN Port: 5060
    8. User: [TBD]
    9. Password:[TBD]
    10. Timeout: 300s
  5. Then to commit the change select "submit" to save the settings.

If successful, look on the main page for the statement: SIP: OK

Next

  • The following procedure is to setup the SIP / Call forwarding to you mobile phone?
  • access the web interface of the NT-IP-DRCR-CE [example, 192.168.x.90]
  • Log in the admin interface using the default username: admin, password: 123456
  • from the left-end menu option select "Forward"
  • In this window, update the following settings:
  • RoomNo:[add the room number #### configured to call your monitor] if unsure, contact tech@becintegrated.com
  • Account: sip:[TBD]@66.185.27.147

Below is your link to download the mobile app.


The mobile app is very straight forward to setup.

  • from the app menu, please select Settings
  • Now, under Room Settings, you match the same info in your Monitor Room Settings. Your Device: for the app will be between 1 to 9. This means that each user app will have a different count.
  • Next, we are still under Room Settings, ensure you match the Sync number of your monitor. This essentially clones the app after the monitor.
  • When done, remember to Save your settings.
  • Next, go to the SIP Settings
  • ensure the ON/OFF box is checked
  • Your proxy states: sip:66.185.27.147
  • each user will use their own SIP account as previously provided. For instance, your user will look like this: User:[TBD]
  • Password:[TBD]
  • When done, remember to Save your settings.

That it! Ensure your mobile app has access to the internet through your local networking connection, WiFi, or data plan.

This section provides a step by step, page by page instruction:

NT-IP-DRCR-CE [No Monitor]

----------------------------------------

Main

----------------------------------------

Smart Home And Intercom System

UI: 1.1.0 20160314 (160)

RES: 1.0.1 20140819 (160)

FW: 1.2.2 20160314 [2016 or newer firmware]

EROM: OK

SIP: OK [okay displayed only is subscribed to SIP service]

----------------------------------------

LAN Settings

IP: 192.168.68.90

Mask: 255.255.255.0

Gateway: 192.168.68.1

DNS: 192.168.68.1

Server IP: 192.168.68.163 [This is the address of the PC that is running the management software]

Password: ••••••

NTP: 198.123.30.132 [Network Time Protocol is used to sync the Intercom’s clock. You can use a local server in your area.]

----------------------------------------

Device Settings

BuildNo: 1 [Building number]

UnitNo: 1 [Unit number]

Floor: 1

RoomNo: 1

No: 1 [Unique number for the outdoor panel (can be any number between 1 & 9). You can have a maximum of 9 door stations for one building number.]

Sys passwd: •••••• [Login password (default is 123456)]

Panel mode: Personal Panel

Ring back: [you can choose 4 different ring back tones for the outdoor panel]

Language: English

Volume: [The volume of the ring back tone on the outdoor panel. You can choose 1-6]

TZ: [Set your time zone]

Forward: All at Once [Select “one by one” to make the unit call the first monitor and then call the rest in sequence or “all at once” to have it call all monitors at the same time ]

----------------------------------------

Access Settings

Unlock timeout: 9 [Amount of time in seconds the door lock stays open. Choose 0-9]

Unlock delay: 0 [Time delay in seconds from when you activate the door unlock to when it triggers the strike. Choose 1-9 seconds ]

Elev refer: 12

Admin Card: 0 [serial No. of the main/master card/fob to program other access cards/fobs. You cannot use the admin card as an unlock card (the admin card will not unlock the door). Cards/Fobs 125KHz ID reader for contact-less card entry]

Security ON/OFF:

Unlock passwd:

0000

....

----------------------------------------

SIP Settings

SIP enable: enable [If using a SIP subscription]

Proxy: sip:66.185.27.147

Realm: 66.185.27.147

Outbound: sip:

STUN IP: 66.185.27.147

STUN Port: 5060

User: ### [SIP subscription provided]

Password: ••••••••••••

Bitrate: 512k [The number of bits per second the unit will use to transmit voice and data. We recommend 512k. These settings should match on all devices (indoor monitor, mobile phone app etc) ]

Timeout: 120s

Ring time: 35s

Host2id:

----------------------------------------

Forward Account Settings [ Make a SIP call to another SIP device (Direct Call)]

RoomNo: 0

Account: 0

Remove:

RoomNo: 101

Account: sip:###@66.185.27.147 [Single SIP account or Ring Group account]

----------------------------------------

Extern Module Settings

Voice GW: [Used to connect to an on-site voice gateway server if you are using one]

URL: sip:192.168.68.176

----------------------------------------

Advanced Settings

Advertising： [Used for touchscreen models]

Url： http://218.5.96.17:8000/ad.html

Timeout：

Quick Call: [Used for touchscreen quick call / guard button]

URL： sip:998@66.185.27.147

Speed Dial: [Used for touchscreen models]

RTSP Feed: [For details, see https://www.becaudio.com/ticket.system/upload/kb/faq.php?id=99]

----------------------------------------

Please Wait!

Please wait... it will take a second!