Frequently Asked Question

[SIP][DRS1][DRCR][DRG][G9W][NT-IP10] - SIP account between door station and monitors
Last Updated 6 years ago

  • SIP password
  • ########## password [Door station]
  • ########## password [Monitor1]
  • ########## password [Monitor2]
  • ########## password [Monitor3]
  • ########## password [Monitor4]
  • ########### [Ring Group Account - only for Single Push button door stations or Group account on complex buildings)

The following procedure is to setup the SIP connection to the NT-door panel?

  1. access the web interface of the NT-IP-A9K-TE [example, 192.168.68.90]
  2. Log in the admin interface using the default username: admin, password: 123456
  3. from the left-end menu option select "VOIP"
  4. In this window, update the following settings:
    1. Under [VOIP / [SIP]]:
    2. SIP enable: [Only enabled if subscribed to the service]
    3. Proxy: sip:66.185.27.147
    4. Realm: 66.185.27.147
    5. Outbound: sip:
    6. STUN IP: 66.185.27.147
    7. STUN Port: 5060
    8. User: TBD
    9. Password: TBD
    10. Timeout: 300s
  5. Then to commit the change select "submit" to save the settings.

If successful, look on the main page for the statement: SIP: OK

Next

The following procedure is to setup the SIP / Call forwarding to your monitors

  • access the web interface of the NT-IP-DRS1 [example, 192.168.68.90]
  • Log in the admin interface using the default username: admin, password: 123456
  • from the left-end menu option select "Forward"
  • In this window, update the following settings:
  • RoomNo:[add the room number 1111 configured to call your monitor] if unsure, contact tech@becintegrated.com
  • Account: sip:TBB@66.185.27.147 is your Ring Group SIP

NOTE: Ring Group number is a special account that is used to contact multiple devices at once as a user group. This can be setup in the following way.

Next

The following procedure is to setup the SIP connection to the NT-IP10 monitor#1

  1. access the web interface of the NT-IP-A9K-TE [example, 192.168.68.101]
  2. Log in the admin interface using the default username: admin, password: 123456
  3. from the left-end menu option select "VOIP"
  4. In this window, update the following settings:
    1. Under [VOIP / [SIP]]:
    2. SIP enable: [Only enabled if subscribed to the service]
    3. Proxy: sip:66.185.27.147
    4. Realm: 66.185.27.147
    5. Outbound: sip:
    6. STUN IP: 66.185.27.147
    7. STUN Port: 5060
    8. User: TBD
    9. Password: TBD
    10. Timeout: 300s
  5. Then to commit the change select "submit" to save the settings.

If successful, look on the main page for the statement: SIP: OK

Next

The following procedure is to setup the SIP connection to the NT-IP10 monitor#2

  1. access the web interface of the NT-IP-A9K-TE [example, 192.168.68.101]
  2. Log in the admin interface using the default username: admin, password: 123456
  3. from the left-end menu option select "VOIP"
  4. In this window, update the following settings:
    1. Under [VOIP / [SIP]]:
    2. SIP enable: [Only enabled if subscribed to the service]
    3. Proxy: sip:66.185.27.147
    4. Realm: 66.185.27.147
    5. Outbound: sip:
    6. STUN IP: 66.185.27.147
    7. STUN Port: 5060
    8. User: TBD
    9. Password: TBD
    10. Timeout: 300s
  5. Then to commit the change select "submit" to save the settings.

If successful, look on the main page for the statement: SIP: OK

Next

The following procedure is to setup the SIP connection to the NT-IP10 monitor#3

  1. access the web interface of the NT-IP-A9K-TE [example, 192.168.68.101]
  2. Log in the admin interface using the default username: admin, password: 123456
  3. from the left-end menu option select "VOIP"
  4. In this window, update the following settings:
    1. Under [VOIP / [SIP]]:
    2. SIP enable: [Only enabled if subscribed to the service]
    3. Proxy: sip:66.185.27.147
    4. Realm: 66.185.27.147
    5. Outbound: sip:
    6. STUN IP: 66.185.27.147
    7. STUN Port: 5060
    8. User: 2020080303
    9. Password: 4A04f9d4
    10. Timeout: 300s
  5. Then to commit the change select "submit" to save the settings.

If successful, look on the main page for the statement: SIP: OK

Next

The following procedure is to setup the SIP connection to the NT-IP10 monitor#4

  1. access the web interface of the NT-IP-A9K-TE [example, 192.168.68.101]
  2. Log in the admin interface using the default username: admin, password: 123456
  3. from the left-end menu option select "VOIP"
  4. In this window, update the following settings:
    1. Under [VOIP / [SIP]]:
    2. SIP enable: [Only enabled if subscribed to the service]
    3. Proxy: sip:66.185.27.147
    4. Realm: 66.185.27.147
    5. Outbound: sip:
    6. STUN IP: 66.185.27.147
    7. STUN Port: 5060
    8. User: TBD
    9. Password: TBD
    10. Timeout: 300s
  5. Then to commit the change select "submit" to save the settings.

If successful, look on the main page for the statement: SIP: OK

Help Topics
Video Entry Systems / NT-IP Series / SIP / VOIP Subscription Request
Video Entry Systems / NT-IP Series
Video Entry Systems / NT-IP 2 Wire Series

Please Wait!

Please wait... it will take a second!