Frequently Asked Question

[Configuring your Mac's network settings]

Follow these steps on each Mac running OS X that you want to connect to the network:
Click the System Preferences icon in the Dock.
Click the Network icon (under Internet & Network).
From the Connection list on the left, click Ethernet.
Click the Configure IPv4 pop-up menu and choose Using DHCP.

configure IPv4 [no DHCP]
IP Address: 192.168.68.110
Subnet Mask: 255.255.255.0
Router: 192.168.68.1
DNS Server: 8.8.8.8

Press cmd+Q to quit System Preferences and save your settings.

[End of Configuring your Mac's network settings]

****************************************************
ping test IP 192.168.0.90 to confirm the laptop can reach the door station.
if ping test is a success, then use your browser [any browser] to access the admin interface of the door station.
In the browser, please enter in the address bar http://192.168.68.90

Login is as follow:
username: admin
password: 123456

There are two main settings to edit / configure to make the door station call in the monitor inside the unit:

1. a) Network Settings
2. b) Device Settings

A - From the left menu option, select [Network] option

[Begin Editing Network Settings [Monitor: NT-IP-DRS1]

DHCP: [to be unchecked]
IP: 192.168.68.90
Mask: 255.255.255.0
Gateway: 192.168.68.1
DNS: 8.8.8.8

Server IP: [the user' laptop or leave as is]
Password: [keep the default - no change]

when done editing, hit the [submit] button.

[End Editing Network Settings [Monitor: NT-IP-DRS1]


B- From the left menu option, select [Device] option
[Begin Editing Device Settings [Monitor: NT-IP-DRS1]

192.168.68.90 [Main Panel]
BuildNo: 1
UnitNo: 1
No.: 1
Floor: 11
RoomNo: 11
Sys passwd: 123456 [leave unchanged]
Panel mode: Person Panel
Forward: All at Once

when done editing, hit the [submit] button.

[End Editing Device Settings [Monitor: NT-IP-DRS1]