Frequently Asked Question
[MT-CAM][CCTV CAMERA 700TV Line][DSP CCD CAMERA] How to install the MT-CAM to the MT-DOOR STATION
Last Updated 6 years ago
CAMERA
DSP CCD CAMERA
PC-243EFF
CCTV CAMERA 700TV Line
3.6mm Manual Zoom Lens
DC12V
PL20140930243N
... the camera needs a 12vDC power supply [power pack - not included] and then needs a 2-wire lead from the camera to the back of the MT door panel. It's been suggested to use a BNC to 2-Pin converter, which is included with the camera.
On the door panel, DIP-6 = Extra Camera ON/OFF and the following chart should help for multi-door & extra cameras. Then on the monitor, you need to perform the function that's written out in the manual to turn ON the extra camera. To bring it up from the screen, press monitor twice to cycle through.
To activate the external camera:
External Camera -
DSP CCD CAMERA
PC-243EFF
CCTV CAMERA 700TV Line
3.6mm Manual Zoom Lens
DC12V
PL20140930243N
... the camera needs a 12vDC power supply [power pack - not included] and then needs a 2-wire lead from the camera to the back of the MT door panel. It's been suggested to use a BNC to 2-Pin converter, which is included with the camera.
On the door panel, DIP-6 = Extra Camera ON/OFF and the following chart should help for multi-door & extra cameras. Then on the monitor, you need to perform the function that's written out in the manual to turn ON the extra camera. To bring it up from the screen, press monitor twice to cycle through.
To activate the external camera:
External Camera -
- Connect with CN5 at the outdoor panel,
- at a room monitor, press and hold Alarm [hat] until it beeps,
- then press Monitor twice.
- Press Alarm [hat] to save and exit.
- press and hold Alarm until it beeps,
- press Monitor once.
- Press Alarm to save and exit.