Frequently Asked Question

First, you need to use or register a master card to the card reader. You proceed as follow:

• connect to the admin site of the door station at 192.168.68.90 [or the IP addressed assigned]
• login using the default username: admin and password: 123456 [or the assigned password]
• select from the left menu option Access
• Register an admin card: input “0” in the Admin Card frame and submit to confirm [save].
• now you can go to the door station
• Then hold the admin card up to the reader, when you hear the beep the card has registered successfully.

Now, you can register your access cards or key fob's to use to unlock the door using your door station:

• Swipe the admin card first,
• then swipe or hold the new access card to the card reader
• within 10 seconds. It will sound a tone to confirm it has successfully registered.

There is another way for building managers to registers many key fobs or access cards using the management software.